← Go To Sharkclean.com

Quick Start Guide


REGULAR CLEANING

Activating Pretreater
CLEAN & BRIGHTEN
  • Dilute Carpet Cleaner 1:7.
  • Attach Carpet/Rug Cleaning Pad.
  • Go over entire area with Sonic Duo system, spraying as needed.
  • Allow to dry.

What’s Needed:

Low Moisture - No Rinse - Carpet Cleaner Carpet/Rug Cleaning Pad

Shark Rotator
REJUVENATE
  • Vacuum entire room or area rug.

What’s Needed:

Vacuum

3 EASY STEPS

HIGH TRAFFIC AREA

Carpet/Rug Pad and Low Moisture -No Rinse- Carpet Cleaner
ACTIVATE
  • Spray trouble areas liberally.
  • Let sit for 3-5 minutes.
  • Attach Carpet Scrub ‘n Stain Pad.
  • Go over affected area with Sonic Duo system.

What’s Needed:

Activating Pretreater

Carpet Scrub ‘n Stain Pad

Activating Pretreater
CLEAN & BRIGHTEN
  • Dilute Carpet Cleaner 1:3.
  • Attach Carpet/Rug Cleaning Pad.
  • Go over entire area with Sonic Duo system, spraying as needed.
  • Repeat until area is cleaned.
  • Allow to dry.

What’s Needed:

Low Moisture - No Rinse - Carpet Cleaner

Carpet/Rug Cleaning Pad

Vacuum
REJUVENATE
  • Vacuum treated area

What’s Needed:

Vacuum

HARD FLOOR CLEANING

Vacuum
PREP
  • Vacuum or sweep first to remove any loose dirt, dust or debris.

What’s Needed:

Vacuum or Broom

Hard Floor Cleaner and Cleaning Pad
CLEAN
  • Dilute Hard Floor Cleaner 1:7.
  • Attach Hard Floor Cleaning Pad.
  • Go over entire area with Sonic Duo system, spraying as needed.
  • Allow to dry.

What’s Needed:

Wood & Hard Floor Cleaner

Hard Floor Cleaning Pad

HARD FLOOR POLISHING

Vacuum
PREP
  • Make sure floors are clean and dry.

What’s Needed:

Wood & Hard Floor Cleaner

Hard Floor Cleaning Pad

Hard Floor Cleaner and Cleaning Pad
SHINE
  • Attach Hard Floor Polishing Pad.
  • Squirt polish liberally in 5’x5’ sections.
  • Spread polish evenly across floor.
  • Allow to dry.

What’s Needed:

Wood & Hard Floor Polish

Hard Floor Polishing Pad

Hard Floor Cleaner and Cleaning Pad
PROTECT
  • Repolish every 2-4 months depending on traffic.

After polishing, allow the Hard Floor Polish to dry for at least 1 hour before walking on the floor, and a complete 24 hours before allowing heavy traffic.

IMPORTANT: Please refer to the Owner's Guide for detailed instructions and warnings before polishing to ensure best results.

STAIN REMOVAL

Vacuum
ACTIVATE
  • Spray liberally.
  • Let sit for 5-10 minutes.

What’s Needed:

Activating Pretreater

Hard Floor Cleaner and Cleaning Pad
CLEAN & LIFT
  • Blot the stain with a clean white cloth.
  • Never rub.
  • Repeat as necessary.

What’s Needed:

White Cloth

For best results treat stains immediately. Set-in stains can be more difficult to remove. Please note that certain stains may cause permanent discoloration even after cleaning.

SIGNUP FOR EXCLUSIVE EMAIL
OFFERS FROM SHARK®


path: /shark-sonic-duo/
Real People Real Results

Click Here to Learn More!