Continue

OK

Shark ION Robot Vacuum R75 with Wi-Fi

Model #: RV750_N

The Shark ION Robot, with Smart Sensor Navigation, two side brushes for edges and corners, and a self-cleaning brushroll, is an ideal solution for daily upkeep. Use the Shark ION Robot app or voice control with Alexa or Google Assistant to start cleaning from anywhere.

Select model
Shop now Shop accessories
What's included
  • Charging Dock
  • 8 ft. of BotBoundary Strips
Shark ION™ Robot Vacuum R75 with Wi-Fi
Shark ION™ Robot Vacuum R75 with Wi-Fi
Shark ION™ Robot Vacuum R75 with Wi-Fi
Shark ION™ Robot Vacuum R75 with Wi-Fi
Shark ION™ Robot Vacuum R75 with Wi-Fi
Shark ION™ Robot Vacuum R75 with Wi-Fi
Shark ION™ Robot Vacuum R75 with Wi-Fi
Shark ION™ Robot Vacuum R75 with Wi-Fi
Shark ION™ Robot Vacuum R75 with Wi-Fi
Shark ION™ Robot Vacuum R75 with Wi-Fi
Shark ION™ Robot Vacuum R75 with Wi-Fi

Details


The Shark ION Robot features Smart Sensor Navigation, a self-cleaning brushroll, and two side brushes—everything you need to automatically clean dust, dirt, large debris, and pet hair on carpets, floors, edges, and corners. Use the Shark ION Robot app or voice control with Alexa or Google Assistant to start cleaning from anywhere.

  • The Shark ION Robot brings the ease of automatic cleaning to everyday upkeep.
  • Schedule or start cleaning from anywhere with the Shark ION Robot app, or voice control with Amazon Alexa or Google Assistant.
  • Smart sensors assess their surroundings on all floors and carpets, adapt to obstacles, and seamlessly navigate around them.
  • Self-cleaning brushroll removes hair, dust, and dander to prevent everyday buildup.
  • Dual side brushes effectively remove dust and debris in hard-to-reach areas like edges, corners, and under furniture.
  • The long-lasting lithium-ion battery provides the runtime your robot needs to complete its cleaning job.
Read More

Parts and Accessories

([[content.parts.collectionSize]] of [[content.parts.collectionCount]])

Videos

([[content.videos.collectionSize]] of [[content.videos.collectionCount]])

FAQs


This FAQ page is a great place to find info, tips and help. Just make sure you’ve read your Owner’s Guide before using your unit.

General Information

How do I set up my Shark ION Robot?
  1. Place the charging dock on a level surface with its back against a wall, in an unobstructed space that can easily be accessed by your Shark ION Robot. Plug the dock into a power outlet. The dock must be plugged in for the robot to find it. Keep any obstructions as far from the dock as possible so the dock can detect the robot wherever it goes.
  2. Prep your home for cleaning. To help your robot complete its mission, remove all obstacles, such as loose power cords, clothes, toys, and low-hanging drapes.
  3. Snap the two included side brushes onto the square pegs on the bottom of the robot. Press the brushes down onto the pegs until they click into place.
  4. Charge your Shark ION Robot completely before using it. Flip the power switch on the side of the robot to the "On" position and place your robot on the dock. When the robot is charging, the battery level indicator lights will begin to cycle. Once your robot is fully charged, simply press the "Clean" button to send your robot into action.
  5. Download the easy-to-use Shark ION Robot app on your iPhone or Android. Search “Shark ION Robot” in the App Store or Google Play to get started.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How does the robot decide where to go?
Your Shark ION Robot is designed with Smart Sensor Technology so it can navigate around obstructions as it cleans your floors. By using an array of sensors, the Shark ION Robot will steer itself around your home, using walls and objects as its guide and gently bumping them. This method allows the robot to travel in and out of rooms and around obstacles. If your Shark ION Robot appears to be spending a lot of time in one spot, don't worry. Over time, its programming will help it cover the full area. Your robot might not hit every area in one cleaning, but by scheduling daily cleaning, you'll notice its cleaning path will differ with each run to ensure it is maintaining your floors.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I prep my home for cleaning?
To help your robot complete its mission, prep your floor by removing all obstacles, such as loose power cords, clothes, toys, and low-hanging drapes. Use the included BotBoundary strips to easily block off obstacles or areas you don't want your robot to enter. See the Tips and Tricks for Great Performance Guide for more information.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
What do the lights mean?


*See the Error Codes section of your Owner's Guide or contact Customer Service at 1-877-581-7375.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
Will my robot fall down stairs?
Your Shark ION Robot was designed with Smart Sensor Navigation that prevents it from falling down stairs. The robot will sense the stairs and change direction to avoid any drops or falls. Visit sharkclean.com/robothelp for more details.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
Where can I buy replacement parts?
Please visit sharkaccessories.com for replacement parts.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
My robot didn't return to the dock. How do I find it?
If your robot is stuck, it will make a beeping noise for 30 seconds so you can find it. Use the Shark ION Robot app's FIND button to locate your robot.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I clean my robot's cliff sensors and charging pads?
For best results, gently dust off cliff sensors and charging pads with a cloth or cleaning brush periodically as needed.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How often should I replace my robot's parts?
CAUTION: Turn off power before performing any maintenance.
  • Main Brushroll: every 6-12 months
  • Side Brushes: when visibly worn
  • Dust Bin Filter: every 2 months
  • Front Caster Wheel: every 12 months
  • Brushroll Door: every 12 months
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
Which parts need regular cleaning and maintenance?
CAUTION: Turn off power before performing any maintenance.

Recommended Cleaning Schedule:
  • Dust Bin: empty after each use
  • Main Brushroll: check weekly
  • Side Brushes: check weekly
  • Dust Bin Filter: clean weekly
  • Front Caster Wheel: remove and clean weekly
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I register my robot?
When initially pairing your robot with the Shark ION Robot App, you will be asked to register your unit. Register your unit at this time or online at registeryourshark.com.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Using the Vacuum

How do I send the robot back to its dock?
When you want to send your robot back to its dock, simply press the Dock button on the robot or app.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How long is one cleaning cycle?
A typical cleaning cycle for your Shark ION Robot lasts about 1 hour.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How long does my robot take to charge?
Your Shark ION Robot needs about 3 hours to fully charge.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Filters

How do I clean the filter?
  1. With the dust bin out of the unit, clear hair from the Anti-Tangle Comb on the dust bin.
  2. Pull the filter using the tabs out of the dust bin.
  3. Tap the filters clean or use a soft brush to remove dust trapped between the pleats. The filter is NOT washable.
  4. Reinsert the filter into the dust bin. Close the dust bin and slide it back into the unit.
  5. After 2 months, visit sharkaccessories.com to purchase a replacement filter.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Brushrolls

How do I clean the brushroll?
  1. Push up on the tabs on the brushroll access door, then lift off the door.
  2. Remove the brushroll.
  3. Clean the brushroll.
  4. Remove the soft end cap of the brushroll and remove any hair or debris buildup. Replace end cap once debris is removed.
  5. To reinstall, insert the flat end first, then the protruding end, then click the brushroll securely into place.
  6. Close the brushroll access door and press down until it clicks into place.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Wheels

How do I remove hair or debris that is stuck in the front wheel?
To clean, pop off the black wheel from the caster on the bottom of the robot. Remove debris that may have built up around the shaft, in the wheel cavity, or on the axle. Reattach the wheel and reinsert the caster assembly before use.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I clear hair that is stuck in the side wheels?
Use scissors to cut away any debris or hair.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I clean the front wheel of the robot?
Your robot's front caster wheel requires cleaning to function properly. Check the front wheel frequently and remove any tangled hair or wrapped debris so the wheel can rotate and spin freely. To clean, pop off the wheel from the caster on the bottom of the robot. Remove debris that may have built up around the shaft and in the wheel cavity. Remove any debris built up on the axle. Reattach the wheel to the caster assembly before use.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

BotBoundary Strips

What are BotBoundary strips?
The brown strips included in the box with your robot are called BotBoundary strips. They are used to quickly and easily create "no-go zones" to keep your robot out of the areas you would like it to avoid.
These may include:
  • Near power cords that might cause tangles
  • Hallways or other areas you don't want your robot to enter
  • Around furniture with low clearance that may trap your robot
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I use my BotBoundary strips?
  1. Cut the BotBoundary strip to the desired length (18" minimum) so it covers the entire perimeter of an object or spans the length of the doorway or other areas you don't want your robot to enter.
  2. Simply place the BotBoundary strip flat on the floor or under an area rug. For best results, make sure the BotBoundary strip is completely flat against the floor.
  3. You can create angles to customize the BotBoundary strips to fit your home. When setting up your BotBoundary strips, it is useful to either make a closed loop around an object or to place them between fixed objects, like door frames or the legs of a couch.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Side Brushes

How do I replace the side brushes?
To remove a bent or damaged side brush, pull it off its post. To install a new side brush, align the hole in the center of the brush over the post on the bottom of the unit. Press the side brush down over the post until it clicks into place.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I clean the side brushes?
The side brushes need regular cleaning, as dirt may adhere to them and hair and fibers can easily get tangled in them.

  1. Carefully unwind and remove string and hair from side brushes. Check and clean underneath the side brushes as well.
  2. Gently wipe side brushes with a damp cloth. Be sure to let them air-dry completely before replacing them.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

App & Voice Controls

How do I download the Shark ION Robot App?
For Apple:
  1. Tap on the App Store icon.
  2. Search the Apple App Store for "Shark ION Robot."
  3. Tap on the Shark ION Robot App.
  4. Tap Install on the next page. Your installation should begin.

For Android:
  1. Tap on the Play Store icon in the Play Store.
  2. Search for "Shark Clean."
  3. Tap on the Shark ION Robot App.
  4. Tap install on the Shark App page. Your installation should begin.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I use the Shark Skill with Amazon Alexa?
To enable the Shark Skill for Amazon Alexa:
  1. Open the Amazon Alexa app, go to the menu and select Skills. Or, go to the Alexa Skills store on the Amazon website.
  2. Search for "Shark Skill".
  3. Select the Shark Skill to open the detail page. Then select the Enable Skill option. After enabling the skill, you can ask Alexa to control your robot using the following commands:
    "Alexa, tell Shark to start cleaning."
    "Alexa, tell Shark to pause my robot."
    "Alexa, tell Shark to send my robot to the dock."
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I use the Shark ION Robot with the Google Assistant?
To set up your robot with the Google Assistant on an Apple device:
  1. Download, open, and sign into the Google Assistant.
  2. Click Explore and scroll down to Home Control, then click More.
  3. Scroll down to Shark and click the link.
  4. Click the Link button to link the Google Assistant to your My SharkNinja account.
  5. Sign into your My SharkNinja account.
    Tip: This is the same account you used when setting up your Shark ION Robot in the Shark ION Robot App.
  6. Click Authorize to link your My SharkNinja account to the Google Assistant.
    Tip: This allows the Google Assistant to work with your Shark ION Robot.
  7. Congratulations! Your accounts are now linked. Try "OK Google, tell Shark to start cleaning" to send a command to your robot.


To set up your robot with the Google Assistant on Android:
  1. Download, open, and sign into the Google Home app.
  2. Click the menu in the top left corner of the screen.
  3. Click on More Settings and chose Shared Devices.
  4. Click the blue plus sign in the bottom right corner of the screen to add a device.
  5. If your Shark ION Robot is connected to Wi-Fi, it will show up on this screen. Click the Shark ION Robot.
  6. Go back to the main screen and click Link to Shark.
  7. Sign into your My SharkNinja account.
    Tip: This is the same account that you used when setting up your Shark ION Robot in the Shark ION Robot App.
  8. Click Authorize to link your My SharkNinja account to the Google Assistant.
    Tip: This allows the Google Assistant to work with your Shark ION Robot.
  9. Congratulations, your accounts are now linked! Try saying, "OK Google, tell Shark to start cleaning" to send a command to your robot.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
What voice commands can I use with my robot?
Here are a few voice commands you can use with your Shark ION Robot.

Amazon Alexa:
"Alexa, tell Shark to start cleaning."
"Alexa, tell Shark to pause my robot."
"Alexa, tell Shark to send my robot to the dock."

Google Assistant:
"OK Google, tell Shark to start cleaning."
"OK Google, tell Shark to pause my robot."
"OK Google, tell Shark to send my robot to the dock."
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How can I control my robot with multiple mobile devices?
To control your robot on multiple devices you will need to log in to Shark ION Robot app on each device. Make sure to use the same password and user name each time.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Dust Bin

What is the maximum dirt capacity for the dust bin container?
0.45 dry quarts to the MAX FILL line.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I empty the dust bin?
  1. Holding the unit over a trash receptacle, press the dust bin removal latch and slide out the dust bin.
  2. Open the dust bin and empty the debris and dust into the trash.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I clean the dust bin?
To wash the dust bin, first remove the filter from the top of the robot. Wash the dust bin with water only, and allow to air-dry completely before reinstalling.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Product Care


This FAQ page is a great place to find info, tips and help. Just make sure you’ve read your Owner’s Guide before using your unit.

General Information

How do I clean my robot's cliff sensors and charging pads?
For best results, gently dust off cliff sensors and charging pads with a cloth or cleaning brush periodically as needed.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How often should I replace my robot's parts?
CAUTION: Turn off power before performing any maintenance.
  • Main Brushroll: every 6-12 months
  • Side Brushes: when visibly worn
  • Dust Bin Filter: every 2 months
  • Front Caster Wheel: every 12 months
  • Brushroll Door: every 12 months
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
Which parts need regular cleaning and maintenance?
CAUTION: Turn off power before performing any maintenance.

Recommended Cleaning Schedule:
  • Dust Bin: empty after each use
  • Main Brushroll: check weekly
  • Side Brushes: check weekly
  • Dust Bin Filter: clean weekly
  • Front Caster Wheel: remove and clean weekly
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Filters

How do I clean the filter?
  1. With the dust bin out of the unit, clear hair from the Anti-Tangle Comb on the dust bin.
  2. Pull the filter using the tabs out of the dust bin.
  3. Tap the filters clean or use a soft brush to remove dust trapped between the pleats. The filter is NOT washable.
  4. Reinsert the filter into the dust bin. Close the dust bin and slide it back into the unit.
  5. After 2 months, visit sharkaccessories.com to purchase a replacement filter.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Brushrolls

How do I clean the brushroll?
  1. Push up on the tabs on the brushroll access door, then lift off the door.
  2. Remove the brushroll.
  3. Clean the brushroll.
  4. Remove the soft end cap of the brushroll and remove any hair or debris buildup. Replace end cap once debris is removed.
  5. To reinstall, insert the flat end first, then the protruding end, then click the brushroll securely into place.
  6. Close the brushroll access door and press down until it clicks into place.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Wheels

How do I remove hair or debris that is stuck in the front wheel?
To clean, pop off the black wheel from the caster on the bottom of the robot. Remove debris that may have built up around the shaft, in the wheel cavity, or on the axle. Reattach the wheel and reinsert the caster assembly before use.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I clear hair that is stuck in the side wheels?
Use scissors to cut away any debris or hair.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I clean the front wheel of the robot?
Your robot's front caster wheel requires cleaning to function properly. Check the front wheel frequently and remove any tangled hair or wrapped debris so the wheel can rotate and spin freely. To clean, pop off the wheel from the caster on the bottom of the robot. Remove debris that may have built up around the shaft and in the wheel cavity. Remove any debris built up on the axle. Reattach the wheel to the caster assembly before use.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Side Brushes

How do I replace the side brushes?
To remove a bent or damaged side brush, pull it off its post. To install a new side brush, align the hole in the center of the brush over the post on the bottom of the unit. Press the side brush down over the post until it clicks into place.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I clean the side brushes?
The side brushes need regular cleaning, as dirt may adhere to them and hair and fibers can easily get tangled in them.

  1. Carefully unwind and remove string and hair from side brushes. Check and clean underneath the side brushes as well.
  2. Gently wipe side brushes with a damp cloth. Be sure to let them air-dry completely before replacing them.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Dust Bin

How do I empty the dust bin?
  1. Holding the unit over a trash receptacle, press the dust bin removal latch and slide out the dust bin.
  2. Open the dust bin and empty the debris and dust into the trash.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I clean the dust bin?
To wash the dust bin, first remove the filter from the top of the robot. Wash the dust bin with water only, and allow to air-dry completely before reinstalling.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Troubleshooting


This FAQ page is a great place to find info, tips and help. Just make sure you’ve read your Owner’s Guide before using your unit.

General Information

I want to return my Shark ION Robot.
If you are not completely satisfied with your purchase, customers may exercise the 60-day money back guarantee option. Please visit sharkclean.com/returns for more information.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Using the Vacuum

What should I do if my robot falls off ledges?
In very rare situations, the robot may not be able to navigate certain areas. It is possible that the robot may fall off a ledge, so use BotBoundary strips to mark off any risky areas.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
Why does my robot not respond when I press the buttons?
In rare situations, the buttons may not respond to touch. If this happens, first try turning the unit off and back on. If the problem persists, try clearing the buttons of any debris. If the buttons still do not work, contact Customer Service at 1-877-581-7375.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I keep my robot from getting stuck in tight spaces or under furniture?
Your robot may find its way under furniture with low clearance, but not be able to free itself. Try using BotBoundary strips to block problem areas. Consider shifting furniture away from carpets or using furniture risers to create clearance.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
What do I do if my robot is stuck on a doorway threshold?
Your robot can easily climb over obstacles up to 3/4" high. Obstructions higher than this may present a challenge. Use BotBoundary strips to block off these areas.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I prevent my robot from getting caught on rug corners?
Your robot can easily climb over obstacles up to 3/4" high. Obstructions higher than this or irregular in shape may present a challenge. Use BotBoundary strips to block off these areas, or attempt to flatten the corner.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
How do I keep my robot from picking up or damaging cords or cables?
Always prep your home before cleaning. Some furniture or loose cords may create problems for your robot. To prevent this, clear away cords and other obstructions before using your robot. If an obstruction can't be moved, block off the area with the included BotBoundary strips. See the Tips and Tricks for Great Performance Guide for more information.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
Why does my robot have trouble transitioning between floor types?
It's possible that the height variance between floor types may be too great for the robot to pass over. If you'd like the robot to clean one of these rooms, lift the robot over the threshold. To prevent the robot from getting stuck between the two floor types, block off the area with BotBoundary strips.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
What should I do if the bumper lens falls out?
In the rare case that a bumper lens falls out from normal wear and tear, snap the piece back in, aligning the tabs with their holes. If the piece does not snap back in easily or is damaged, visit sharkaccessories.com for replacement parts.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
Why is my robot turning in open spaces?
In rare situations, the robot may begin to turn in open spaces. If this happens, first try turning the unit off and back on. If the problem persists, contact Customer Service at 1-877-581-7375.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
Why does my robot's bumper make a squeaking sound?
Very rarely, the front bumper may begin to squeak from normal wear and tear. Visit sharkaccessories.com to purchase a replacement bumper.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
Why is my robot wiggling while docking?
Your robot is in the final stages of its docking routine and is making sure it aligns with the charging pads on the dock.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
Why won't the robot clean my area rug?
The robot may struggle with some high-pile carpets. If your robot continues to have issues with the area, use the included BotBoundary strips to block off the area. You may purchase additional BotBoundary strips from sharkaccessories.com.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
My Shark ION Robot is getting stuck. What should I do?
During your first few cleanings, you may need to make some small adjustments to optimize your robot's performance.

  1. Always prep your home before cleaning. Some furniture or loose cords may create problems for your robot. To prevent this, clear away cords and other obstructions. If an obstruction can't be moved, block off the area with the included BotBoundary strips.
  2. Your robot may find its way under furniture with low clearance, but not be able to free itself. Try using BotBoundary strips to block problem areas. Consider shifting furniture away from carpets or using furniture risers to create clearance.
  3. Your robot can easily climb over obstacles up to 3/4" high. Obstructions higher than this may present a challenge. Use BotBoundary strips to block off these areas.
  4. Your robot is designed to run for approximately 60 minutes before searching for its dock. If your robot roams too far, it may have trouble finding the dock. Make sure the dock is centrally located, with 3 feet of clearance on either side. Depending on the size of your floor space, it may be helpful to use BotBoundary strips to keep your robot from traveling too far. You can also add a second dock, available at sharkaccessories.com.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
My robot has detected a clog. What should I do?
First, remove and empty the dust bin. Press the filter door release button, open the door, and remove the filter. Clean the dust bin and filter with a cleaning brush. Next, turn the unit over and remove the brushroll. Look into the inlet to see if anything might be stuck, and remove any obstructions.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
My robot's front bumper is stuck. What should I do?
Pick up the Shark ION Robot to free it from whatever it is stuck on. Press the bumper back a few times, making sure it moves freely and isn't locked in a position where it's pressed back. If the bumper remains stuck, contact Customer Service at 1-877-581-7375.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
Why does the robot power on when it gets knocked off the dock?
If your robot is kicked or pushed off its dock or the power goes out, the robot may attempt to locate the dock. If the robot is unable to find the dock within 30 seconds, it will turn itself off.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Brushrolls

How do I remove hair that is wrapped around the brushroll?
Remove the brushroll from the unit by lifting off the brushroll access door, then pulling out the brushroll. Use scissors or the cleaning tool provided with your unit to cut away any debris or hair. Replace the brushroll to resume cleaning.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Wheels

Why does the caster wheel make a squeaking sound?
Very rarely, the caster wheel may begin to squeak from normal wear and tear. Visit sharkaccessories.com to purchase a replacement caster wheel.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

BotBoundary Strips

Why does my robot go past the BotBoundary strip?
In rare cases, the robot may struggle to recognize a BotBoundary strip. First, move the strip to a new location. If the robot still ignores the BotBoundary strip, replace the strip with a new one. If the issue persists, contact Customer Service at 1-877-581-7375.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Side Brushes

How do I remove hair that is wrapped around a side brush?
Remove the side brush by pulling it off its post. Use scissors to cut away any debris or hair. Reinsert the side brush to continue cleaning.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

App & Voice Controls

What should I do if the robot loses Wi-Fi connectivity?
The Shark ION Robot may be losing connectivity for two reasons: the Wi-Fi signal may be weak, or the robot may have entered a zone that blocks Wi-Fi. It is normal for your robot to temporarily lose connectivity when it goes under couches or moves through parts of your house that are far from your router. Your Shark ION Robot will automatically reconnect to Wi-Fi. If for some reason, the robot does not reconnect on its own, remove the unit from the dock. Power the robot off, wait 10 seconds, power the robot back on, and place it back on the dock.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later

Dust Bin

How do I keep from dumping debris onto the floor when removing the dust bin?
When removing the dust bin, hold the robot over a trash can to catch any debris that falls out.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
What do I do if the dust bin inlet gets clogged?
First, remove and empty the dust bin. Press the filter door release button, open the door, and remove the filter. Clean the dust bin and filter with a cleaning brush. Next, turn the unit over and remove the brushroll. Look into the inlet to see if anything might be stuck, and remove any obstructions.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later
Why does the dust bin make a squeaking sound?
Very rarely, the dust bin may begin to squeak from normal wear and tear. Visit sharkaccessories.com to purchase a replacement dust bin.
Your feedback is on its way to us
Thank you for your feedback
Something went wrong, please try again later