Shark Navigator® Pet Upright Vacuum

NV151
The Shark Navigator® Swivel Pro Complete Upright Vacuum is designed for homes with pets, combining Shark® suction with versatile tools to tackle stubborn pet hair.
$199.99
Includes Five (5) Year Limited Warranty

Deep-cleaning power. Whole-home capacity.

With amazing suction power and a 2XL-capacity dust cup, it’s got whole-home cleaning ability.

Floors, carpets, and everything in between.

Serious suction power combines with a deep-cleaning bristle brushroll to handle floors, carpets, and hard-to-reach areas with ease.

The Shark Navigator® Swivel Pro Complete Upright Vacuum is designed for homes with pets, combining Shark® suction with versatile tools to tackle stubborn pet hair. An extendable hose provides up to 11 feet of total reach, while Anti-Allergen Complete Seal Technology® and a HEPA filter trap dust and allergens, keeping them out of the air you breathe.
• Powerful upright vacuum suction picks up embedded debris, stubborn pet hair, and more
• Lightweight at 15 lbs. to allow for easy maneuverability and portability
• Anti-Allergen Complete Seal Technology® and a HEPA filter trap dust and allergens inside the vacuum cleaner
• Extendable hose for up to 11 feet of total reach for vacuuming hard-to-reach areas
• Swivel Steering provides heightened control so your vacuum can maneuver around your home with ease
• Specially designed pet tools remove pet hair on furniture, in tight spaces, and on carpets
• 5-year limited warranty
Cleaning Path Width10 in
Cord Length25 ft
Hose Length11 ft
Dust Cup Capacity0.87 qt
Amperage5.8 amps
Filter TypeWashable HEPA + Foam and Felt Filters
Warranty (years)5
Product Dimensions12 in L x 9.06 in W x in H
Weight13.1 lbs

Free shipping on all orders over $75*. 


Orders to be shipped to Hawaii, Alaska, territories outside of the contiguous 48 states, or an international address are subject to a $25 surcharge.


SharkNinja offers a 60-day money back guarantee or a 90-day money back guarantee on purchases for select products. The applicable money back guarantee will be stated with your order.

*See individual product offerings for details.


  • Crevice tool
  • Upholstery tool
  • Pet power brush

How and when do I adjust the suction?
The suction control slider located on the top of the handle allows you to adjust the suction. You can choose the optimal suction level for both bare floors and carpets.

Slide to MIN to reduce suction and increase maneuverability on carpets.

Slide to MAX to increase suction on bare floors.
How do I assemble my vacuum?
  • Insert the wand into the floor nozzle.
  • Insert the handle into the wand.
  • Place the pod onto the wand and slide down to connect.
  • Connect the hose into the back of the pod, until it clicks into place


For proper operation, ensure all parts are firmly clicked into place.
How do I clean above floors with or without accessories?
To remove the handle:
  • Press the release button on the back of the handle and gently lift it off the wand. Add an accessory and begin cleaning.


To remove the handle and wand together:
  • With the handle still attached to the wand, remove the cord from the clip.
  • Press the wand release button and gently pull up on the handle to remove the wand from the pod.
  • Add an accessory to the end of the wand and begin cleaning.
  • To replace, insert the wand into the pod and press down until it clicks into place.
How do I use the different cleaning modes?
The Shark Navigator® Swivel Pro Complete Upright Vacuum has two settings for cleaning.

For bare floors and delicate area rugs:
  • Slide the selector switch to setting I, Hard Floor.
  • To activate the brushroll, gently step on the floor nozzle and tilt the handle back.
  • Note that the brushroll will spin slower in Hard Floor mode.


For carpets:
  • Slide the selector switch to setting II, Carpet.
  • To activate the brushroll, gently step on the floor nozzle and tilt the handle back.
  • The brushroll will spin faster in Carpet mode.
When and how do I clean the filters?
Filters may need to be cleaned if the vacuum is not picking up dirt, if airflow is restricted, or if you notice lighter or no suction. To maintain optimal performance, tap filters clean periodically and wash them according to the regular cleaning schedule.

Rinse the pre-motor foam and felt filters every month, or as needed.
  1. Make sure the vacuum is unplugged.
  2. Remove the dust cup and pull the foam and felt filters out from the pod.
  3. Rinse filters thoroughly in cold water until the water runs clear. DO NOT place filters in the dishwasher or washing machine.
  4. Squeeze out excess water and let filters air-dry completely for at least 24 hours before replacing.
  5. When filters are completely dry, reinstall the felt filter first, then add the foam filter on top.


Rinse the post-motor HEPA filter every 12 months, or as needed.
  1. Make sure the vacuum is unplugged.
  2. Remove the dust cup by pressing the button on the dust cup handle.
  3. Press down on the top of the filter door, then tilt the door and lift it out.
  4. Remove the HEPA filter cartridge and rinse under cold water, dirty side down, until the water runs clear.
  5. Allow the filter to air-dry completely for 24 hours.
  6. Once the HEPA filter is dry, reinstall it. Insert the bottom into the pod first, then press in the top until it clicks into place.
  7. To reinstall the filter door, insert the bottom into the pod first, then press in the top until it clicks into place.
When and how do I empty the dust cup?
The dust cup should be emptied each time you vacuum and periodically during cleaning, when it appears full. For optimal performance, empty the dust cup before debris reaches the MAX FILL line.

  1. Press the release button on the top of the dust cup handle.
  2. Tilt the dust cup and lift it away from the vacuum body.
  3. Hold the dust cup over the trash and press the bottom door release button on the front of the dust cup. The bottom lid will drop open.
  4. Tap gently to empty contents.
  5. Close the lid, pressing it until it clicks into place.
  6. If needed, turn the dust cup upside down over the trash and press the top door release button.
  7. Tap gently to remove contents and wipe the interior of the dust cup clean with a soft cloth.
  8. To reinsert the dust cup, install the bottom into the pod first, then press in the top until it clicks into place.

Shark Navigator® Pet Upright Vacuum
$199.99