Continue

OK
Back Shark®  Support Center

Product support & information

Product series

Shark Navigator® Swivel Pro Complete Upright Vacuum

Model #s

NV150, NV150C, NV151

Shark Navigator® Swivel Pro Complete Upright Vacuum
Shark Navigator® Swivel Pro Complete Upright Vacuum
Shark Navigator® Swivel Pro Complete Upright Vacuum
Shark Navigator® Swivel Pro Complete Upright Vacuum
Shark Navigator® Swivel Pro Complete Upright Vacuum
Shark Navigator® Swivel Pro Complete Upright Vacuum
Shark Navigator® Swivel Pro Complete Upright Vacuum
How do I use the different cleaning modes?
The Shark Navigator® Swivel Pro Complete Upright Vacuum has two settings for cleaning.

For bare floors and delicate area rugs:
  • Slide the selector switch to setting I, Hard Floor.
  • To activate the brushroll, gently step on the floor nozzle and tilt the handle back.
  • Note that the brushroll will spin slower in Hard Floor mode.


For carpets:
  • Slide the selector switch to setting II, Carpet.
  • To activate the brushroll, gently step on the floor nozzle and tilt the handle back.
  • The brushroll will spin faster in Carpet mode.
How do I use the different cleaning modes?
Did this solve your problem? Yes No Great! We're happy to hear it. Please call Customer Care at 1-877-581-7375
How do I clean above floors with or without accessories?
To remove the handle:
  • Press the release button on the back of the handle and gently lift it off the wand. Add an accessory and begin cleaning.


To remove the handle and wand together:
  • With the handle still attached to the wand, remove the cord from the clip.
  • Press the wand release button and gently pull up on the handle to remove the wand from the pod.
  • Add an accessory to the end of the wand and begin cleaning.
  • To replace, insert the wand into the pod and press down until it clicks into place.
How do I clean above floors with or without accessories?
Did this solve your problem? Yes No Great! We're happy to hear it. Please call Customer Care at 1-877-581-7375
How and when do I adjust the suction?
The suction control slider located on the top of the handle allows you to adjust the suction. You can choose the optimal suction level for both bare floors and carpets.

Slide to MIN to reduce suction and increase maneuverability on carpets.

Slide to MAX to increase suction on bare floors.
How and when do I adjust the suction?
Did this solve your problem? Yes No Great! We're happy to hear it. Please call Customer Care at 1-877-581-7375
How do I assemble my vacuum?
  • Insert the wand into the floor nozzle.
  • Insert the handle into the wand.
  • Place the pod onto the wand and slide down to connect.
  • Connect the hose into the back of the pod, until it clicks into place


For proper operation, ensure all parts are firmly clicked into place.
How do I assemble my vacuum?
Did this solve your problem? Yes No Great! We're happy to hear it. Please call Customer Care at 1-877-581-7375
When and how do I empty the dust cup?
The dust cup should be emptied each time you vacuum and periodically during cleaning, when it appears full. For optimal performance, empty the dust cup before debris reaches the MAX FILL line.

  1. Press the release button on the top of the dust cup handle.
  2. Tilt the dust cup and lift it away from the vacuum body.
  3. Hold the dust cup over the trash and press the bottom door release button on the front of the dust cup. The bottom lid will drop open.
  4. Tap gently to empty contents.
  5. Close the lid, pressing it until it clicks into place.
  6. If needed, turn the dust cup upside down over the trash and press the top door release button.
  7. Tap gently to remove contents and wipe the interior of the dust cup clean with a soft cloth.
  8. To reinsert the dust cup, install the bottom into the pod first, then press in the top until it clicks into place.
When and how do I empty the dust cup?
Did this solve your problem? Yes No Great! We're happy to hear it. Please call Customer Care at 1-877-581-7375